Home
Suppliers

No supplier

Best Sellers
New Sato: CL412NX, CL4NX - 305... Quick view

Brand: SATO

Sato: CL412NX, CL4NX - 305 DPI, Made In USA Compatible Printhead

Review(s): 0

Country of Origin: Made in USA. Rockwell Surface Hardness Rating: 85 Environmental Protection: Resistive Pastes with Gold Circuitry   Installation: Temperature Settings may need Adjustments This Printhead is also known by the following Part Numbers: R29798000, SSP-112-1344-AM108 & AM108 Our OEM Compatible Printhead works in the following Sato: CL...

Price $149.00
More
In stock
New On sale! Mimaki JV33 / JV5 Print... Quick view

Reference: JV33 / JV5

Brand: Mimaki

Mimaki JV33 / JV5 Print Head Assy

Review(s): 0

This original Mimaki JV33/JV5 printhead is suitable for the Mimaki CJV / JV33-JV5 solvent printer series. This printhead has a native resolution of 1440dpi, 8 nozzle lines (corresponding with 8 independent ink channels) and 180 nozzles per line. SKU: PPHMIJV5006 Manufacturer part number: M007947 Availability: In stock

Price $430.00
More
In stock
All best sellers

  • Banner

  • On sale!
  • New

Okidata: LE810 - 203 DPI, Made in USA Compatible Printhead

Rating 
$187.00
Tax excluded
Quantity

Description

Country of Origin: Made in USA.
Rockwell Surface Hardness Rating: 85
Environmental Protection: Resistive Pastes with Gold Circuitry  
Installation: Temperature Settings may need Adjustments

This Printhead is also known by the following Part Numbers: 62307503, AM67a, SSP112896AM67a & SSP-112-896-AM67a

Our Okidata OEM Compatible Printhead works in the following printer models: Okidata: LE810

Our Warranty Equals Okidata's warranty. Our New Okidata compatible thermal printhead is available for shipment worldwide. This is a brand-new Okidata OEM Compatible Printhead. This is not a rebuilt and not a re-manufactured Printhead - BRAND New and Made in the USA.

 Our Thermal Printhead Under Normal Wear

  • An abrasive life of 100 kilometers.
  • A thermal life of 100 million pulses.
  • The resistance in our thermal printhead is consistent up to 330,000 inches.
  • Our printhead is built for a 100% dot duty cycle. Our printhead duty cycle provides you with clarity, print accuracy, and accurate dot reproduction.
  • Dot density up to 203 dpi (8 dpmm)
  • Print speed up to 12 inches (300mm) per second
  • Resistor line location (edge, near edge, etc.) Allows you to print at the edge of your media.
  • Direct thermal or thermal transfer printhead.

How do we achieve these results?

  • Our Printhead is built using a protective diamond like carbon (DLC) coating and is specifically designed for Okidata Part Number 62307503. Our Diamond like coating provides a surface hardness equivalent to Rockwell 85 to 90. The Diamond like coating will protect the printhead when used in bar coding, ticket printing, thermal printing, printing against ribbons, and printing using other abrasive media. 
  • Our Thermal Print head uses Thick film technology. Thick Film printheads use gold, insulating and resistive pastes which are screen printed onto a ceramic substrate. The thick film technology allows for a reduction in resistance versus pressure contact technology. As a thermal printhead wears the value of resistance changes. A 15% change in the value of resistance results in a printhead unable to function and print the required dot density.
  • Our thermal printhead will use Gold wire bond between the printed circuit board and ceramic substrate. We believe the gold wire bond provides for greater signal integrity and a longer life of the printhead.
  • Our thermal print head uses a hard black epoxy and silicon glass clear coating to protect the gold wire bonds and sensitive electronic circuitry against moisture and harsh environments. 
  • Our thermal printhead incorporates the use of positive temperature coefficient (PTC) and negative temperature coefficient(NTC) thermistors for regulating temperature in the printhead. The PTC thermistor is used to quickly bring the printhead up to operating temperature, increasing your first time print cycle, and conserving energy. The NTC thermistor is used to regulate the heat output which conserves energy and prolongs the life of the printhead. This combination thermometer and resistor device is expensive.
Product Details
Okidata
1111 Items
Reviews

No customer reviews for the moment.

Write your review

DataMax I-4308 & A-4310 - 300 DPI, OEM Printhead

Okidata: LE810 - 203 DPI, Made in USA Compatible Printhead

Write your review
16 other products in the same category:
New Emerald QE-256/10 Printhead Quick view

Brand: Dimatix

Emerald QE-256/10 Printhead

Review(s): 0

The Emerald QE-256/10 AAA printhead combines precise jetting with versatile grayscale operation. Using a durable field proven nozzle plate, its lightweight, thin-profile and configurable design supports a wide range of ink types with broad operational latitude to accommodate variations in jetting properties making this printhead ideal for scanning printer...

Price $1,020.00
More
In stock
New Sato: CG212 (DT) - 305 DPI,... Quick view

Brand: SATO

Sato: CG212 (DT) - 305 DPI, OEM Printhead

Review(s): 0

Country of Origin: Made in China. Engineered by Sato. Rockwell Surface Hardness Rating: 33 Environmental Protection: Pressure Sealed Circuits Installation: OEM Printhead. Drop and Go. This OEM Printhead is also known by the following Part Numbers: R13870000 Our Sato OEM Printhead works in the following printer models: Sato: CG212 DT & CG212 Direct...

Price $88.00
More
In stock
New On sale! Datamax: I-Class, I-4206,... Quick view

Brand: Datamax-O'Neil

Datamax: I-Class, I-4206, I-4208, I-4210, I-4212 - 203 DPI, OEM Equivalent Printhead

Review(s): 0

Country of Origin: Made in China. Engineered in the USA. Rockwell Surface Hardness Rating: 65 Environmental Protection: Pressure Sealed Circuits Installation: Same as OEM. Drop in Replacement This Printhead is also known by the following Part Numbers: 20-2181-01, phd20-2181-01, KPW104-8TBB4-DMX2, dm20-2181-01, KPA-104-8MTA4-DMX6, KPA-104-8MTA4-DMX2,...

Price $108.00
More
In stock

Follow us on Facebook

Facebook